-
Buy NowLOCTITE® 542-50ml| medium strength
Features: a controlled strength threadlocker, formulated specifically for metal tapered pipe thread fittings.
-
Buy NowLoctite 290 Green Medium to High Strength Threadlocking Adhesive (250 ml)
- Ideal for locking preassembled fasteners, e.g. instrumentation fasteners, electrical connectors and set screws
- Works on metal only
Applications Pre-Assembled WickingRemovable Medium Strength Product Note Only products containing the NSF Mark are Certified. Agency Approvals / Specifications MIL-S-46163A for existing designs, CFIA Listed, NSF P1, ASTM D-5363, NSF/ANSI 61 Full Cure Temperature (°F) 77 Key Characteristics General Purpose, Strength: High Strength, Corrosion Inhibiting,
Viscosity: Low Viscosity, Rust Inhibiting, Strength: Medium StrengthNumber of Components 1 Part Physical Form Liquid Specific Gravity (g/l @ 25°C) 1.08 Temperature Range (°F) -65 to 300 Torque Break on M10 Steel (in./lb.) 90 Torque Prevail on M10 Steel (in./lb.) 260 Viscosity Range (Brookfield mPa.s (cP)) 25 to 55 Viscosity Temperature (°F) 77 -
Buy NowLoctite 290 Threadlocker, Pack Size: 50 Ml
Loctite 290 threadlocker wicking grade
-
Buy NowLoctite 277 Red High Strength Threadlocking Adhesive (250 ml)
- High viscosity
- Breakaway torque on M10 bolts of 32 Nm
- Prevents unwanted movement, loosening, leaks and corrosion
- Resists vibration
- High strength
- Suited to large threads
-
Buy NowLoctite 277, Threadlocker, Red (50ml), High strength threadlock
LOCTITE 277 is a high strength threadlocking adhesive. The product cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration. Suitable for locking and sealing large bolts and studs.
-
Buy NowLoctite 272 Threadlocker, Pack Size: 250 Ml
Loctite 272 threadlocker high strength/high temp.
-
Buy NowLoctite 272 50Ml Heavy Duty High Strength Threadlocker, Pack of 1
Features rubber-infused technology which creates a flexible bond that resists impact, twisting and pulling. Works in all temperatures and conditions. Gel formula does not run and the squeeze side grips make dispensing the right amount of glue a snap.
-
Buy NowLoctite 2701 High Strength 50 Ml Heavy Duty Threadlocker, Pack of 1
- Metal parts are removable with hand tools for easy disassembly
- Sets in 10 minutes; cures in 24 hours
- Prevents leaks and rusting of threads for 1/4-inch to 3/4-inch (6mm to 20mm) nuts and bolts
- Useful for small motors, mowers, and power equipment
- Very effective
-
Buy NowLoctite 270 Red High Strength Threadlocking Adhesive (250 ml)
- Prevents loosening and leakage from shock & vibration: It wicks into the grooves between the mating threads and cures into a hard thermoset plastic that strengthens the assembly against shocks and seals the threads.
- Low viscosity product: The low viscosity of this product makes it ideal for occupying the tiniest of gaps between the threads so that proper clamp load in maintained.
- Fluorescent: It has a characteristic blue colour that fluoresces under UV light. This helps during service to detect as to whether or not the product had been applied.
- Low strength: It is suitable for applications that need frequent disassembly, as it can be easily removed using standard hand tools.
-
Buy NowLoctite 263 Red High Strength Threadlocking Adhesive (250 ml)
- Prevents loosening and leakage from shock & vibration: It occupies all gaps between the mating threads and cures into a hard thermoset plastic that strengthens the assembly against by adding approximately 40% to the normal loosening torque.
- High strength: Designed for permanent applications which must not come loose. Needs localized heating to disassemble.
- Works well on all metal substrates even passive ones like stainless steel and plated surfaces.
- Fluorescent: It has a characteristic red colour that fluoresces under UV light. This helps during service to detect as to whether or not the product had been applied.
Maximum Thread Size <1″ Temperature Resistance 180oC Breakaway/Prevail Torque (N.m) 32/32 Cure Time (Fixture/Cure Strength) 10 min/24 hour -
Buy NowLoctite 135375 Red 262 High Strength Thread Locker, 300 degrees F Maximum Temperature, 250 ml
Loctite 262 red thread locker is compatible with metal materials with a 24 hr. cure time. Delivers great performance with a shear strength of 1450 psi and tensile strength of 189 psi. Minimum to maximum operating temperatures are -65 F to +300 F.
-
Buy NowLoctite 262 High Strength Heavy Duty 50 Ml Threadlocker, Pack of 1
Features rubber-infused technology which creates a flexible bond that resists impact, twisting and pulling. Works in all temperatures and conditions. Gel formula does not run and the squeeze side grips make dispensing the right amount of glue a snap.
-
Buy NowLoctite 243 Threadlocker, Pack Size: 250 Ml
Features rubber-infused technology which creates a flexible bond that resists impact, twisting and pulling. Works in all temperatures and conditions. Gel formula does not run and the squeeze side grips make dispensing the right amount of glue a snap.
-
Buy NowLoctite 243 High Strength 50 Ml Heavy Duty Threadlocker, Pack of 1
- Metal parts are removable with hand tools for easy disassembly
- Sets in 10 minutes; cures in 24 hours
- Prevents leaks and rusting of threads for 1/4-inch to 3/4-inch (6mm to 20mm) nuts and bolts
- Useful for small motors, mowers, and power equipment
- Very effective
-
-
Buy NowLoctite 242 Threadlocker (50ml)
81% positive ratings from 5K+ customers
10K+ recent orders from this brand
9+ years on Amazon
-
Buy NowLoctite 222-250ml, Threadlocker, Purple, prevention of loosening Acrylic adhesive
- Prevents loosening and leakage from shock & vibration
- Low strength: It is suitable for applications that need frequent disassembly
- Bonds well despite minor surface contamination due to industrial oils
- Works well on even passive metal surfaces like stainless steel, aluminum and plated surfaces
-
Buy NowLoctite 222 Threadlocker, Pack Size: 50 Ml
Loctite 222 threadlocker low strength/small screw
